Let’s take a look at the installation steps of the manual shutter. Put the finished curtain into the window frame, mark the position of the lead screw on the top of the door shades, lock the left and right lead screws on the top of the window frame respectively, and lift the rotatable module without the bead head. Tighten the open rotatable module to ensure that the shutter is not easy to fall off, and the installation is complete.
1 installation steps. Mounting Accessories of door shades
Determine the left-right direction of the head and the vertical direction of the tire rim. The left and right sides of the head are interchangeable. Everyone can install the head according to their own placement habits. The bead puller can be rotated and used for lifting after side loading and top loading respectively.
2. After installing the head to produce “outside” and compare the window with the finished product, the position of the production screw of the mark head is on the window frame or wall, tighten the left and right heads to produce the screw on the window frame or wall, and then raise the head of the rotatable module produced, do not put it bead.
3. (1) Install the right end of the upper rail to the beaded head first, and install the left end of the upper rail to the non-beaded head.
(2) Tighten the open rotatable module to ensure that the shutter is not easy to fall off, and the installation is complete.
(3) Gently pull down the front of the bead curtain and lift the bead curtain.
(4) Pull down the back of the bead curtain and roll down the bead curtain.
1. The inside and outside of the curtain
Inside – inside the window frame, outside – outside the window frame.
2. Are the curtains inside or outside?
The window frame is generally installed on the window frame. If you don’t like water leaking on both sides, you can choose the outside.
1. First put the right end of the upper rail into the head with pull beads, and then put the left end of the upper rail into the head without pull beads.
2. Buckle the opened rotatable module and confirm that the roller blind will not fall or move easily, then the installation is complete.
3. Gently pull down the bead curtain on the front side, and the roller blind will automatically rise.
4. Pull down the bead curtain on the rear side to control the descent of the roller blind.
For more relevant content, please pay attention to the official website of UNITEC, and update you with a large number of practical knowledge about choosing curtains every day, so that you can become a decoration expert in seconds.
Email me 
